Cisco 5700 Series Wireless Controller for up to 25 AP
Environmental Parameters
Humidity Range Operating:
5 - 95% (non-condensing)
Max Operating Temperature:
45 °C
Min Operating Temperature:
-5 °C
Expansion / Connectivity
Expansion Slots:
1 (total) / 1 (free) x expansion slot ¦ 6 (total) / 6 (free) x
Interfaces:
1 x management - RJ-45 ¦ 1 x 1000Base-T (management) - RJ-45 ¦ 1 x USB ¦ 2 x USB - Type A
General
Depth:
45 cm
Device Type:
Network management device
Height:
4.45 cm
Height (Rack Units):
1U
Width:
44.5 cm
Miscellaneous
Compliant Standards:
CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, CISPR 22, AS/NZS 60950-1, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60950-1, ICES Class A, VCCI Class A
Networking
Authentication Method:
RADIUS, TACACS, Extensible Authentication Protocol (EAP)
Capacity:
Manageable access points: 25
Compliant Standards:
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.3x, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11e, IEEE 802.11n, IEEE 802.1AX, IEEE 802.11ac
Connectivity Technology:
Wireless, wired
Data Link Protocol:
Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Encryption Algorithm:
DES, Triple DES, RC4, MD5, AES, 128-bit WEP, 40-bit WEP, IKE, SSL, TLS 1.0, 104-bit WEP, TKIP, WPA, WPA2, PKI, AES-CCMP, 128-bit AES, AES-CCM, AES-CBC, DTLS, 1024-bit RSA, 2048-bit RSA, TLS 1.1
Features:
DHCP support, BOOTP support, ARP support, Syslog support, manageable, IPv6 support, SNTP support, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), RADIUS support, CleanAir technology, CAPWAP support
Form Factor:
External
Network / Transport Protocol:
TCP/IP, UDP/IP, ICMP/IP, IPSec, ARP, BOOTP, DHCP
Ports Qty:
6
Remote Management Protocol:
SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH
Routing Protocol:
CIDR
Status Indicators:
Power, system, link/activity
Switching Protocol:
Ethernet
Power
Installed Qty:
1
Max Supported Qty:
2
Power Device:
Internal power supply - hot-plug
Power Redundancy:
Optional
Voltage Required:
AC 120/230 V (50/60 Hz)